If you're a fan of the sharpness, twang, and snap of single - coil pickups but can't tolerate the 60 - cycle hum, the NOISE REDUCER NR300 is your solution. Plug it in and say goodbye to unwanted noise forever! The NR300 maintains the original attack and envelope, keeping your playing style and dynamics intact, so you can focus on your performance. Features: It efficiently gets rid of unwanted noise and hum without changing your tone. This Behringer product is designed to rival top - selling products on the market. It preserves the initial attack and envelope while leaving your playing characteristics untouched. With dedicated Threshold and Decay controls and a Mute mode, it offers great flexibility. There's an additional Send/Return loop for suppressing noise in external effect units. A Status LED shows when the effect is on/off and checks the battery. It runs on a 9V battery or the Behringer PSU - SB DC power supply (not included). It has a first - class electronic On/Off switch for top - notch signal integrity in bypass mode. It's designed and engineered in Germany.
Using the Behringer NR300 is easy. First, you can power it either with a 9V battery or the Behringer PSU - SB DC power supply (you'll need to get the power supply separately). Plug your guitar into the pedal. Once it's connected, you can adjust the Threshold and Decay controls according to your needs. The Threshold control helps you set the level at which the noise reduction kicks in, and the Decay control affects how quickly the noise reduction fades. The Mute mode can be handy when you want to quickly cut off the sound. There's also an additional Send/Return loop if you have external effect units and want to reduce the noise from them. The Status LED will let you know if the effect is on or off and also check the battery status. As for maintenance, keep it in a dry place. If you're using a battery, replace it when the Status LED shows low battery. And be gentle with the On/Off switch to keep the signal integrity high.
