The Bassman 100T is a must - have for professional bassists, whether you're performing on stage or recording in the studio. This 100 - watt tube amplifier head packs a punch with authentic Fender bass sound and a vintage Fender look that sparkles. It combines modern tech and innovative features on both front and rear panels with classic '60s 'blackface' styling. Key features include 100 watts of power, tube preamp and power amp, rear - panel Fender Automatic Bias system, impedance switch for 2, 4, and 8 ohms, XLR line out with ground lift, level control, and pre/post EQ switch, and an output power switch with 100 watts, 25 watts, and silent record mode. Specifications include 100 - watt power, 230V European voltage, a variety of controls for vintage and overdrive channels, two inputs, one XLR line out, specific power and preamp tubes, a solid - state rectifier, and comes with a 1 - button drive select accessory. It has dimensions of 24.5' (62.2 cm) W X 10' (25.4 cm) H X 10.63' (27 cm) D and weighs 48.5 lbs. (22 kg).
Using the Fender Bassman 100T is easy. First, connect your bass guitar to one of the two inputs. You can choose between the vintage and overdrive channels depending on the sound you want. Adjust the controls like volume, bass, mid, and treble to fine - tune your tone. When using the XLR line out, you can control the level and choose between pre - or post - EQ sound. Make sure to set the impedance switch according to your speaker's impedance. As for the output power switch, you can select 100 watts for a full - power sound, 25 watts for a more subdued volume, or use the silent record mode for recording without a lot of external noise. When it comes to maintenance, keep the amplifier in a dry and clean place. Check the tubes regularly for any signs of damage. If you need to replace a tube, make sure to use the same type as specified in the product's specifications. And always turn off the amplifier and unplug it from the power source before any maintenance work.
